Flexible Colloidal Retarding Agent Water Soluble Lightning Protection

Hot Sale Factory Directly Sales HD-J10 Colloidal Reducing Agent

Structural composition of water-soluble colloidal retarding reducing agent.

1, Conducting agent.

2, Antiseptic agent

3, Mixing agent

4, Coagulant

5, Catalyst

Strong conductive materials are used to reduce the grounding resistance, corrosion-resistant materials are used to extend the service life of the grounding body, curing materials play a cohesive role, on the one hand, so that the drag reducing agent will not be washed away by rain or lost, on the other hand, it can make the drag reducing agent and the grounding body closely combined to form one, play the role of water absorption and water retention.

Stability of reducing agent: HD-J10 type reducing agent will not be washed away or lost by rain after solidification, and the solidified reducing agent will not change its state under high and low temperature after testing.

The long-lasting effect of reducing agent. HD-J10 type reducing agent's water retention is above 60%, which creates conditions for long-term stability of reducing agent to reduce grounding resistance.

Corrosion prevention of reducing agent: HD-J10 type reducing agent is weakly alkaline, which can synthesize the acid in the soil, thus reducing the corrosion rate. And the resistance reducing agent completely wraps the metal grounding body, so that the oxygen on the metal surface is isolated and the intrusion of the corrosive liquid in the soil is isolated, creating an airtight and safe environment for the metal grounding body.

Environmental protection of coagulant: HD-J10 coagulant uses food-grade additives, which will not cause pollution to the environment. It will not be lost to the soil after solidification and will not cause secondary pollution.

The permeability of the drag reducing agent: the drag reducing agent is in liquid state before forming a solid, the liquid drag reducing agent will have permeability in a certain range of soil and spread outward, so that the soil resistivity in the permeable area is greatly reduced. This is exactly the problem we often encounter in the construction process, the higher the soil resistivity, the worse the soil weathering rock, etc., the more obvious an important reason for the use of drag reducing agent after the drag reducing effect.

The resistance reduction principle of the resistance reducing agent. When the drag reducing agent is used around the metal grounding body, it first tightly wraps the grounding body and is closely connected to the soil layer, forming a conductive body with a large diameter, and this conductive body will appear in the earth as a dendritic extension. Produce dendritic effect (reducing agent through the soil gap to the surrounding soil), so that the reducing agent becomes a kind of **** of medium, its inner layer is closely connected with the metal grounding body, while its outer layer is closely connected with the soil, thus greatly reducing the contact resistance of the grounding body and soil. Reducing agent increases the volume of the metal grounding body, thus reducing the grounding resistance, the resistivity of the reducing agent itself is very small, the resistivity of HD-J10 type water-soluble reducing agent is only 1.57Ω. m (in many domestic reducing agent is very senior), reducing agent wrapped in the grounding body, compared with the resistivity of the soil, the resistivity of the reducing agent is generally two orders of magnitude smaller, so the resistance of the reducing agent can be Negligible Consider the reducing agent as metal, which is equivalent to increasing the size of the grounding body, thus achieving the purpose of reducing the grounding resistance

Scope of application

Use is not limited by environmental conditions,suitable for all areas requiring resistance reduction.