Resistance Reducing Effect Exactly Grounding Electrode Trial Independently Develop

Flexible grounding body HD-R10Y is mainly used in grounding network buried resistance reduction; the original metal grounding body corrosion effect is relatively poor, in addition is not suitable for mountainous areas, especially rocky areas to use,

flexible grounding body HD-R10Y applied to mountainous rocky terrain grounding resistance reduction, not subject to geographical conditions, can be made on site, according to the site conditions molding, no corrosion of the metal connection body, good resistance reduction effect, this flexible grounding The body is composed of non-metallic conductive powder, polymer and microfiber adhesive.

The use is not restricted by environmental conditions, as long as the construction can be received according to the amount of resistance reduction effect, long service life, resistance reduction effect is stable.

Construction of flexible grounding body

(1) Flexible grounding body is a kind of compound formula product. It includes: conductive agent, preservative, blending agent, flexibility agent, channel agent, coagulant, catalyst, etc.

(2) First dig the grounding trench, weld the horizontal grounding body, and the vertical grounding electrode.

(3) Open the lid of the barrel and take off the two bags of raw materials stuck to the inner lid.

(4) Open the plastic bag and turn the plastic bag over to the outside of the barrel with a wooden stick into the barrel to stir the sediment and liquid. (When the temperature is low, you should use a heating rod to warm up the liquid in the barrel to about 30 degrees)

(5) Open the two external bags of raw materials and add them to the liquid and stir well, and take them to the edge of the ditch, or the pit, to be used.

(6) As vertical pouring can be poured directly.

(7) If you do horizontal pouring, you need to keep stirring slowly until the resistance of the liquid in the barrel increases and becomes sticky like porridge, then pour it into the trench to wrap the horizontal grounding body and form a long line of pouring while pouring.

(8) wait for its solidification to form with elastic grounding conductor, at this time will no longer dissolve in water, can be backfilled, the construction of flexible Hunan Hertz-Ohm Engineering Group Co., Ltd. 4 grounding body thus ended

(9) Backfill the grounding trench, and clean up the site garbage, measure the qualified can record the results and then leave the site.