Ornamental SS304 ESE Type Lightning Arrester Residential For substation

Decorative Lightning Rods (ESE) HD-ZZ-6 Decorative Lightning Rod / Lightning Tower

Pre-discharge

When the lightning rod cut off by lightninhe use of shell and centre grounding rod between 3mm gap, constituting a coupling capacitang, by the flash body to receive the flash, through the lightning waveform processing device, tce, while the shell through an inductive coil grounding (centre grounding rod) when the downstream pilot close to the receiver, due to the frequency is very high, the inductor is open-circuit state, capacitance to high frequency presents a short-circuit characteristics, so the coupling capacitance under the action of the receiver surface electric field strength increased rapidly, until the trigger avalanche process, so that the lightning current can be discharged into the ground in a moment, so as to effectively achieve the purpose of preventing lightning damage to ensure safety.

Decorative lightning rod is also called decorative lightning tower.

Suitable for installation on the top of landmark buildings, major office buildings. Beautiful and generous, novel and unique, durable and good decorative effect. It can increase the beauty of the appearance of the stationing point and enhance the overall image of the building.

Our company can produce different shapes, different heights and different weights of decorative lightning rods (towers) according to customer requirements or according to the appearance of the building design.

Principle

Lightning rod, also known as lightning rod, lightning rod, is a device used to protect buildings, tall trees, etc. from lightning strikes. When the thundercloud discharge close to the ground it makes the ground electric field distortion. At the top of the lightning rod, the formation of local electric field concentration space to influence the development direction of the lightning pilot discharge, guide lightning discharge to the lightning rod, and then through the grounding lead wire and grounding device to introduce lightning current into the earth, so that the protected object from lightning strikes.

Scope of application

Decorative lightning rod is also called decorative lightning tower.

Suitable for installation in landmark buildings, major office buildings top. Beautiful and generous, novel and unique, durable, good decorative effect. Can increase the appearance of the stationed without the beauty, enhance the overall image of the building.

Our company can according to customer requirements or according to the appearance of the building design, production of different shapes, different heights, different weight decorative lightning rod (tower)