All Products
-
Lightning Grounding System
-
Lightning Protection Rod
-
Lightning Protection System
-
Power Surge Protection Device
-
Signal Surge Protection Device
-
Ground Enhancement Material
-
Lightning Repeller
-
Anti Corrosion Coating
-
Aircraft Warning Lights
-
Stainless Steel Lightning Rod
-
Earth Termination System
-
Decorative Lightning Rods
-
Lightning Protection Plug
-
Marshall LawThank you for helping us to complete our lightning protection grounding work, our wind power project found several lightning protection companies can not complete, your flexible grounding body is really amazing, thanks again!" . -
john wickThank you for your assistance in completing the tower lightning protection project. Your company's service is very considerate and technologically advanced, especially the flexible grounding body earthing project, which greatly reduces our cost and time, and I hope to have the opportunity to cooperate again.
Contact Person :
cody
Phone Number :
86-17349642793
Whatsapp :
+8617349642793
SPD C2 385V Lightning Protection System Power Surge Arrester For Transmission Equipment
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Details
| Color | Customized | Product Name | Surge Protector |
|---|---|---|---|
| Maximum Continuous Operating Voltage Uc | 385V | Operating Frequency | ≤2.0MHz |
| High Light | SPD C2 Lightning Protection System,385V power surge arrester,SPD C2 power surge arrester |
||
Product Description
Overview
The EPL series cable lightning arresters are designed to protect transmission equipment connected by twisted pair wires from atmospheric or operational overvoltages and are suitable for communication systems, computer systems and automatic control systems. It not only provides multi-level fine protection with low residual voltage between twisted pairs, but also provides high-energy common mode protection to ground for twisted pairs.
● It adopts multi-stage protection circuit and the core components are selected from international **** with stable performance.
● With large through-current capacity, low signal port clamp voltage, low insertion loss, sensitive response, and transmission signal frequency up to 2MHz.
● Easy installation, no special maintenance, long service life, etc.
Technical parameters
Product Model EPL-120
Rated working voltage Un 120V
**** Continuous working withstand voltage Uc 150V
Rated working current In 300mA
SPD test category C2
Nominal discharge current Isc (8/20μs): symmetrical/asymmetrical (PE)
12.5A/5kA
Voltage protection class Up: symmetrical/asymmetrical (PE)
240V/0.6kV
Operating frequency ≤2.0MHz
Insertion loss ≤3dB
Dimension 18mm×90mm×58mm
Connection method Wired
Working environment conditions
Temperature range: -40℃~+70℃.
Humidity range. 30%~85% (25℃)
Precautions after installation
1,External signal wires (2 wires) are connected to the "line" end and 2 signal wires are led from the "device" end to the protected device end.
2, the ground wire and PE line is reliably connected.
Caution
1,This product is only suitable for indoor use.
2,Do not install in thunderstorm.
Recommended Products
